Wednesday, June 19, 2024
HomeIndustrialUses to air oil coolers

Uses to air oil coolers


Oil coolers are also known as D cup coolers. This is used in drain lines where several displacements pump up to 70 bar working pressure is required. These can also be used where steady oil flow up to 10 LPM is required. We at Hpp Group are the India’s top manufacturers and suppliers of these oil coolers and oil cooler heat exchanger in Delhi and all over India.


In the recent age, you can see the air cooled oil coolers in the drain lines where several displacements pump is required. These are very cost effective and can be used where steady oil flow up to 10 LPM is required. It operates under the maximum pressure of 6 BAR. Some unique features you can get by using this device. These are as follows-

The manufacturers of hydraulic oil coolers make a wide range of products as per client’s requirements. But it has some standard specifications.

These are-

  • Cast iron headers are used.
  • Nitrile seals and Viton seals are preferred.
  • The temperature should be greater than 100 Celsius.


Our HPP-L-608 model prevents your electronic components from the loss due to overheating. Its oil flow LPM is 1-12, Also the fan size is 6 (150) inches. This oil cooler model presents the best drain line for VD pumps. But make sure that the bar pressure of the variable Displacement pump needs to be up to 70 bar pressure. Noise DBA depends on voltage and the frequency is 50 GHz. The optimum accuracy level and easy operation of this model make it the first preference of the users. Buy this model today to increase the life of your item.

Oil Flow LPMFan Size Inch (mm)No. Of FansPhasePower SourceVoltage VFrequency HZCurrent ANoise dBA


Please enter your comment!
Please enter your name here

Most Popular

Recent Comments